Zebra 170PAX2 Series Guía de usuario descargar pdf (Pagina 36)

Label Positioning Parameters

BACKFEED

Backfeed Sequence Press the RIGHT or LEFT BLACK OVAL key to dis-

play other choices.

Default: Default (90%)

Selections: Default, after, before, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%,

off

This parameter establishes when and how much label backfeed occurs after a

label is removed or cut in the peel-off, cutter, and applicator modes. It has no

effect in rewind or tear-off modes. This parameter setting can be superseded by

the ~JS instruction when received as part of a label format (refer to the ZPL II

Programming Guide Volume I).

NOTE: The difference between the value entered and 100% establishes

how much backfeed occurs before the next label is printed. For example, a

value of 40 means that 40% of the backfeed takes place after the label is

removed or cut. The remaining 60% takes place before the next label is

printed. A value of “before” means that all backfeed will take place before

the next label is printed.

LABEL TOP Adjusting Label Top Position Press the RIGHT BLACK OVAL key to

increase the value, press the LEFT BLACK OVAL key to decrease the value.

The displayed value represents dots.

Default: +0

Range: -120 to +120 dot rows

The label top position adjusts the print position vertically on the label. Positive

numbers adjust the label top position further down the label (away from the

printhead), negative numbers adjust the position up the label (toward the print-

head).

LEFT POSITION Adjusting Left Position Press the LEFT BLACK OVAL key to move to the

next position, press the RIGHT BLACK OVAL key to change between + and -

and to increase the value of the digit. The displayed value represents dots.

Default: 0000

Range: -9999 to +9999

NOTE: For a negative value, enter the value before changing to the minus

sign.

This parameter establishes how far from the left edge of a label the format will

begin to print by adjusting horizontal positioning on the label. Positive numbers

adjust the printing to the left by the number of dots selected, negative numbers

shift printing to the right.

Table 3: Configuration and Calibration Description (Continued)

Press Display Shows Action/Explanation

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Sin comentarios

Zebra 170PAX2 Series Guía de usuario Pagina 36