Zebra 170PAX2 Series Guía de usuario descargar pdf (Pagina 40)

REPRINT MODE

Setting the Reprint Mode Press the RIGHT or LEFT BLACK OVAL key

to display other choices.

Default: Disabled

Selections: Disabled, Enabled

When the Reprint feature is enabled, the “Reprint” input signal (Pin 6) on the

applicator port is functional. When the input signal is asserted, the last label

printed will be printed again. (This includes non-printing labels.) When the

Reprint feature is disabled, the “Reprint” input signal is ignored.

NOTE: The ^SP command is ignored when the Reprint feature is enabled.

When the Reprint feature is disabled, the ^SP command can be used. In

addition, when a received label format is canceled prior to printing, the

“reprint” function for the previous label is also canceled.

Sensor Values

WEB S.

These parameters are automatically set during the calibration procedure.

They should only be changed by a qualified service technician. Refer to the

maintenance manual for more information on these parameters.

Press the NEXT/SAVE key repeatedly to skip these parameters.

MEDIA S.

RIBBON S.

MARK S.

MARK MED S.

MEDIA LED

RIBBON LED

MARK LED

Table 3: Configuration and Calibration Description (Continued)

Press Display Shows Action/Explanation

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 99 100

Sin comentarios

Zebra 170PAX2 Series Guía de usuario Pagina 40